Better With Age - Architects' Guide to Glass & Metal - Architects' Guide to Glass & Metal

Better With Age

July 29th, 2021 | Category: Architects' Guide to Glass and Metal

Glass Coatings Continue to Advance Performance and Possibilities

By Ellen Rogers

The development of low-E coatings in the 1970s was a game changer for architectural glass. It provided a means to use an abundance of glass while keeping occupants comfortable and without concern of increased energy costs. Glass also became clearer. In the past, it often had to become darker to provide the same comfort and performance. Low-E coatings, however, were an early step toward reducing the amount of Ultraviolet and infrared light that passed through glass while still maintaining visible light transmittance (VLT). And that was just the beginning. With subsequent advances in higher performing products came a drive by the codes for even better glazing products. Today, it’s quite likely that no new building would meet codes without the use of coated glass. Glass coatings have evolved to offer not only improved energy performance, but are also more clear and transparent. As they continue to advance, they pave the way for future developments.

Changes and Trends

Today’s coated glass has come a long way since the early days of low-E. Technologies have continued to evolve and there are hundreds of options for individual locations, climate zones and aesthetic effects.

“The glass world has been dominated by the Magnetron Sputtering Vapor Deposition (MSVD) coating realm,” says Nathan McKenna, director of marketing and innovation with Vitro Architectural Glass (formerly PPG). “[MSVD products] dominated the technology and development, and part of that is every time the code changed you needed a higher performance glass… to reach those numbers in the climate zone.” He explains that within the codes, it’s the Solar Heat Gain Coefficient (SHGC) and U-value that have become increasingly stringent.

“That’s leading the charge on the commercial side, because coatings have gotten better,” he says. “The trends have gone from having to use dark glass to get the performance, to now achieving it with clear glass because the coatings have gotten better,” he adds.

Tim McKittrick, the sector manager for thin film photovoltaics at Pilkington, says architects are focusing on thermal performance of glass coatings—maximizing daylight transmission while minimizing solar heat gain and having good U-value performance.

“Thermal performance is the most important feature of coated glass. Whether that’s achieving excellent U-values in heating dominated regions or attaining low SHGCs in cooling dominated regions, the comfort of the occupants and the associated energy costs of maintaining that comfort are the key factors for commercial buildings.”

Alissa Schmidt, architectural design and technical services manager with Viracon, points out that while the general idea of high light transmittance combined with solar performance to optimize a building’s energy efficiency isn’t new, there’s been an increased focus on balancing the two.

“As a result, coating development has been highly focused on pinpointing specific light transmittance and SHGC requirements,” she says.

While coatings have advanced to become increasingly high performance, they have also evolved aesthetically. Kristen Petersen, architectural design specialist with Viracon, says gray is trending. “Using low-iron glass is very popular to help reduce some of the green tint,” she says, adding that even with coatings that have a neutral gray appearance, “I think there will still be demand for something even more neutral gray, without having to use a tinted substrate and lose the reflectivity that gives the vibrant appearance.”

Another architectural trend has been the increasing demand for bigger sizes of glass, which means companies have had to change their operations to accommodate coating larger sizes. Yago Martinez, AGC Interpane’s business development manager for North America, has seen a lot of demand for jumbo-sized coated glass and, with that, has come improved quality and consistency in the coating process.

“Previously, there was not a huge requirement when it comes to consistency. Now there are means to keep tighter control over color consistency.”

Continual Improvement

While VLT, SHGC and U-Value are important performance criteria for coatings, there is not a one-size-fits-all option. What’s right for one project in one region may not work for another building somewhere else. Schmidt points out that building-specific criteria is being added to the general key performance criteria.

“A building may require a coating with low exterior reflectance due to its orientation and surroundings. A different building may need a bird-collision mitigation treatment in addition to the coating. A one-size-fits all coating solution is becoming less and less common,” she says.

Marni Windschitl, architectural design associate, who is also with Viracon, agrees that the most important performance features of coated glass are dependent upon a number of considerations, in particular, location.

“The owner/consultant/architect should work with a glass fabricator to make sure the performance goals are met based on energy calculations,” she says. “The orientation of the building (North/South/East/West) also comes into play when determining performance requirements. Almost all commercial buildings are cooling dominated; selecting a coating with a low SHGC is always a good idea.”

A Closer Look

Triple silver coatings have seen significant development over the past decade. McKittrick says this has been one of the biggest developments in coated glass.

“Initially, they were single silver based, but have progressed to double silver and now to triple silver based,” he says. “Doing so subsequently improved the selectivity and thermal performance of the solar control insulating glass units.”

Martinez agrees, adding that it’s the silver that gives the glass its selectivity behavior. He explains that selectivity is the ratio between how much light and how much energy goes through the glass. “Newer coatings have a higher selectivity ratio so you can allow more than twice as much light as energy,” says Martinez. “The more silver, the more selective,” he says, adding that it’s not simply a matter of placing a coating of silver upon a coating of silver multiple times.

“[Silver] is expensive and can also give the glass a green appearance. The process is complex because every time you use a silver layer you need to add other layers on top, and you continue to repeat the layers each time. So if you want to go from single silver to double silver, you’re adding five or six layers and you have to keep increasing those to go to a triple silver.”

The first triple silver coatings tended to give the glass a green aesthetic. Many process tweaks and changes to improve the clarity have occurred over the years to help reduce the greenish hue common in glass. Companies learned that different layer stacks of the coatings can offset that green color and still provide high performance. And those layers also mean enhanced performance.

The Next Generation

Low-E coatings have continued to develop since they were first introduced. As building codes continue to advance, we can expect to see increasingly high-performance glass as well. McKenna says as the environmental impact of building products continues to move to the forefront of importance, programs such as LEED and Net Zero, among others, will become so prevalent that products have to evolve to meet those needs.

“You also have to keep an eye on what the future of work-life really is. Is the commercial office building the future or is it in smaller pockets?” he says. “It’s hard to say, because we don’t know what the commercial office building will look like in the next ten years. It’s hard to predict, but sustainability and green will continue to be important.”

McKittrick adds they are also seeing an increasing interest in carbon neutral buildings. “That means [the use of ] building integrated photovoltaics which often require a coated glass substrate to perform efficiently without becoming objectionable from an aesthetic viewpoint,” he says.

Petersen adds, “I see [coatings] becoming even more energy efficient, with even lower SHGCs. Perhaps coatings that were once our best performers are going to need to perform even better.”

Ellen Rogers is the editor of the Architects’ Guide to Glass & Metal magazine. Follow her on Twitter@USGlass and like USGlass on Facebook to receive updates.

To view the laid-in version of this article in our digital edition, CLICK HERE.

Leave Comment

X
This site uses cookies which allow us to give you the best browsing experience possible. Cookies are files stored in your browser and are used by most websites to help personalize your web experience. By continuing to use our website, you are agreeing to our use of cookies. To find out more, please see our Privacy Policy.